Balanced Pressure Chambers

Safe Against Pressure Surges

Unbalanced Pressure Protection

Accuracy Unaffected by Static Pressure Changes

Calibrated to Read Both Rising and Falling Pressures

Can be Calibrated to have a Centre Zero Indicating Pointer
 

• 100 mm and 160 mm Diameter
• Maximum Pressure 400 mbar
• Out of balance Pressure 7 bar max
• Accuracy 2% Full Scale Deflection
• All Metal Construction

Standard Calibrations

• 0 to 80 mbar or 0 to 30”H20
• 0 to 100 mbar or 0 to 160”H20

        Maximum Line Pressure 7 bar
        (100 p.s.i.)
 

All ranges can be calibrated to have a centre zero for reading in both directions
(For lower pressures, call our technical department).
 

Special Dial Markings

Dials calibrated in other pressure units - such as kN/m2, MN/m2, kPa, Kg/cm2,
cm water, meters of water, cm Hg, inches Hg etc single scale, dual scale or with square root markings - can be supplied if required. An extra charge is made for special dial marking, dependent on the costs involved.

Gauges with dials marked positive and negative relative to atmospheric pressure, to indicate pressure and vacuum on the same instrument, can be supplied.

Please note: Absolute Pressure Gauges are not available
 

Technical Detail

Click on the image below for a PDF providing detailed specifications, variants and options.

• 0 to 250 mbar or 0 to 100”H20
• 0 to 400 mbar or 0 to 160”H20

        Maximum Line Pressure 34 bar
        (500 p.s.i.)